Numerical analyses of underground openings in competent rock masses: continuous vs discontinuous

A. Pierotti, M. Leoni, D. Lo Presti

Аннотация


The paper is aimed at comparing the results of numerical analyses of underground openings in competent rock masses like the Carrara Marble (Italy) by considering a real and well documented case study. More specifically, 3D FEM and DEM analyses were carried out on a rock-mass model interested by two faults and three sets of discontinuities. The geometrical model is representative of deep underground openings where spalling - cracks and rock bursts can occur. PLAXIS 3D and 3DEC were used for the analyses. Intact rock and rock mass characterization of Carrara Marble was inferred from available technical literature. The analysis results were compared in terms of principal stresses and displacements in a number of monitoring points around the opening. The main practical interest is to find out a reliable approach for evaluating the stability of very large openings in a competent rock mass like Carrara marble. For such a purpose, a number of available in-situ stress measurements were used.


Полный текст:

Статья в формате PDF

Литература


Kirsch G. Die theorie der elastizitat und die bedurfinisse der festigkeitslehre [The theory of elasticity and the requirements of strength theory]. Zentralblatt Verein Deutscher Ingenieure, 1898, vol. 42, no. 28, pp. 797–807.

Hoek E., Brown E. T. Underground excavations in Rock. CRC Press, 1982, 532 p.

Clough R. W. The finite element method in plane stress analysis. Proceedings of Second ASCE Conference Electronic Computations. Pittsburg, 1960. 35 p.

Zienkiewicz O. C. The finite element method in engineering sciences. 3rd ed. New York, McGraw-Hill, 1977. 521 p.

Cundall P. A. A computer model for simulating progressive, large scale movements in blocky rock systems. Proceedings of the International symposium Rock Fracture (ISRM), 1971, vol. 2, paper no. II‑8.

Cundall P. A. Technical report MRD‑2–74. Rational design of tunnel supports: a computer model for rock mass behaviour using interactive graphic for the input and output of geomaterial data. Omaha, 1974. 195 p.

Nikolic M., Roje-Bonacci T., Ibrahimbegovic A. Overview of the numerical methods for the modelling of rock mechanics problems. Tehnicki vjesnik, 2016, vol. 23 (2), pp. 627–637.

Scheldt T. Comparison of Continuous and Discontinuous Modelling for Computational Rock Mechanics. Proc. of 10th ISRM Congress. Sandton, 2003, 6 p.

Barton N. Quantitative description of rock masses for design of NMT reinforcement. Proc. of Int. Conf. on Hydro Power Development In Himalayas. Shimla, 1998, pp. 379–400.

Barla G., Barla M. Continuum and discontinuum modelling in tunnel engineering. Rudarsko-geolosko-naftni zbornik, 2000, vol. 12, pp. 15–35.

Barla G., Barla M., Repetto L. Continuum and discontinuum modelling for design analysis of tunnels, Proc. of 9th Int. Congr. On Rock Mech. Paris, 1999, 6 p.

Sainsbury B. L., Sainsbury D. P. Practical Use of the Ubiquitous-Joint Constitutive Model for the Simulation of Anisotropic Rock Masses. Rock Mechanics and Rock Engineering, 2017, vol. 50, pp. 1507–1528.

Riahi A., Curran J. H. Full 3D finite element Cosserat formulation with application in layered structures. Applied Mathematical Modelling, 2009, vol. 33, pp. 3450–3454.

Scavia C. Continuous and discontinuous approaches in rock mechanics and rock engineering. Rivista Italiana di Geotecnica, XV Croce Lecture, 2019, vol. 53 (2), 8 p.

Brinkgreve R. B. J., Kumarswamy S., Swolfs W. M. Plaxis 3D Manuals. Delft, Plaxis, 2017. 470 p.

ITASCA Consulting group, Inc. (1993). UDEC/3DEC. Available at: http://www.itascacg.com/software/udec. 17. Ferrero A., Migliazza M., Segalini A. In situ fracturing mechanics stress measurements to improve underground quarry stability analyses. Proceedings of the 3rd CANUS Rock Mechanics Symposium. Toronto, 2009, pp.1–8. Paper 3964.

Ferrero A., Migliazza M., Segalini A., Gulli, D. In situ stress measurements interpretations in large underground marble quarry by 3D modeling. International Journal of Rock Mechanics & Mining Sciences, 2013, vol. 60, pp. 103–113.

Cravero M., Gulli D., Iabichino G., Nacci F., Valentino D. Geomechanical characterization and numerical modelling of an open pit and underground marble quarry. Proc. of ISRM Int. Symp. — EUROCK 2002. Madeira, 2002, pp. 571–578.

Cravero M., Gulli D., Iabichino G. Comparative mechanical characterization of marble by means of laboratory testing. Proc. of 12th Panamerican Conf. on soil Mech. And Geothec. Eng. Soil Rock, 39th U. S. Rock Mech. Symp. Cambridge, 2003.

Hoek E., Brown E. Practical estimates of rock mass strength. Int. J. Rock Mech. Min. Sci., 1997, vol. 34 (8),

pp. 1165–1186.

Hoek E., Carranza-Torres C., Corkum B. Hoek-Brown failure criterion — 2002 Edition. Proc. NARMS-TAC Conference. Toronto, 2002, vol. 1, pp. 267–273.

Bieniawski Z. Engineering rock mass classification. New York, Wiley, 1989. 272 p.

ROCLAB, ROCSCIENCE. V.1.031. Rock mass strength analysis, software freeware. Toronto, 2007.

Gulli D., Pellegri M. Stress analysis on Carrara marble quarries. Proc. of 6th Int. Symp. on In-Situ Rock Stress. Sendai, 2013, pp. 1–18.


Ссылки

  • На текущий момент ссылки отсутствуют.


(c) 2021 Russian Journal of Construction Science and Technology